HP ElitePad 1000 HP ElitePad 1000 G2 Maintenance and Service Guide - Page 44

disconnect the TouchScreen cable, to which the TouchScreen cable is attached, and then

Get HP ElitePad 1000 PDF manuals and user guides View all HP ElitePad 1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

19. Release the ZIF connector (4) to which the LVDS cable is attached, and then disconnect the LVDS cable (5) from the system board. 20. Remove the display assembly and cables. 21. If it is necessary to replace the display assembly cables: a. Turn the display assembly upside down, with the bottom toward you. b. Detach the TouchScreen cable (1) from the surface of the display assembly. (The TouchScreen cable is attached to the display assembly with double-sided adhesive.) c. Release the ZIF connector (2) to which the TouchScreen cable is attached, and then disconnect the TouchScreen cable (3) from the display assembly. d. Detach the display LVDS cable (4) from the surface of the display assembly. (The display LVDS cable is attached to the display assembly with double-sided adhesive.) 36 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
19.
Release the ZIF connector
(4)
to which the LVDS cable is attached, and then disconnect the LVDS
cable
(5)
from the system board.
20.
Remove the display assembly and cables.
21.
If it is necessary to replace the display assembly cables:
a.
Turn the display assembly upside down, with the bottom toward you.
b.
Detach the TouchScreen cable
(1)
from the surface of the display assembly. (The
TouchScreen cable is attached to the display assembly with double-sided adhesive.)
c.
Release the ZIF connector
(2)
to which the TouchScreen cable is attached, and then
disconnect the TouchScreen cable
(3)
from the display assembly.
d.
Detach the display LVDS cable
(4)
from the surface of the display assembly. (The display
LVDS cable is attached to the display assembly with double-sided adhesive.)
36
Chapter 5
Removal and replacement procedures