HP ElitePad 1000 HP ElitePad 1000 G2 Maintenance and Service Guide - Page 94

System board

Get HP ElitePad 1000 PDF manuals and user guides View all HP ElitePad 1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

System board Description System board (includes docking connector, HDMI port, and USB port) Spare part number 744044-001 Before removing the system board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet or the Security Jacket. 3. Disconnect all external devices from the Security Jacket. 4. Remove the card reader cover and top cap (see Card reader cover and Top cap on page 82). 5. If installed, remove the tablet from the Security Jacket (see Card reader cover and Top cap on page 82). 6. Remove the front cover (see Front cover on page 84). Remove the system board: 1. Place the front cover face down on the work surface with the bottom toward you. 2. Remove the six Phillips PM1.9×3.4 screws (1) that secure the system board to the front cover. 3. Release the docking connector (2) from the opening in the front cover. 4. Remove the system board (3). Reverse this procedure to install the system board. 86 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
System board
Description
Spare part number
System board (includes docking connector, HDMI port, and USB port)
744044-001
Before removing the system board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet or the
Security Jacket.
3.
Disconnect all external devices from the Security Jacket.
4.
Remove the card reader cover and top cap (see
Card reader cover and Top cap
on page
82
).
5.
If installed, remove the tablet from the Security Jacket (see
Card reader cover and Top cap
on page
82
).
6.
Remove the front cover (see
Front cover
on page
84
).
Remove the system board:
1.
Place the front cover face down on the work surface with the bottom toward you.
2.
Remove the six Phillips PM1.9×3.4 screws
(1)
that secure the system board to the front cover.
3.
Release the docking connector
(2)
from the opening in the front cover.
4.
Remove the system board
(3)
.
Reverse this procedure to install the system board.
86
Chapter 5
Removal and replacement procedures