HP ElitePad 1000 HP ElitePad 1000 G2 Maintenance and Service Guide - Page 61
System board, Battery see
View all HP ElitePad 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
System board NOTE: The system board spare part kit is equipped with an Intel Atom z3795 quad core 1.60-GHz processor (burst up to 2.39-GHz; 2.0-MB L2 cache), and 4096-MB of system memory and includes the processor, memory, and eMMC. Description Equipped with 128-GB of eMMC primary storage Equipped with 64-GB of eMMC primary storage Spare part number 753741-001 753740-001 Before removing the system board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display assembly (see Display assembly on page 30), and then remove the following components: a. NFC antenna (see NFC antenna on page 38) b. WWAN module (see WWAN module on page 39) c. Power button board (see Power button board on page 45) d. Battery (see Battery on page 51) Remove the system board: 1. Release the forward-facing webcam (1) from the molding built into the bottom cover. 2. Disconnect the audio jack board cable (2) from the system board. Tablet component replacement procedures 53