HP ElitePad 1000 HP ElitePad 1000 G2 Maintenance and Service Guide - Page 73
Speakers, Docking connector cable see
View all HP ElitePad 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Speakers Description Speakers (include left and right speakers and cables) Spare part number 747629-001 Before removing the speakers, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display assembly (see Display assembly on page 30), and then remove the following components: a. NFC antenna (see NFC antenna on page 38) b. WWAN module (see WWAN module on page 39) c. Power button board (see Power button board on page 45) d. Battery (see Battery on page 51) e. System board (see System board on page 53) f. Docking connector cable (see Docking connector cable on page 59) Remove the speakers: 1. Release the tabs (1) built into the bottom cover that secure the speaker cable, and then release the speaker cable. 2. Remove the four Phillips PM1.3×2.0 screws (2) that secure the speakers to the bottom cover. Tablet component replacement procedures 65