HP ElitePad 1000 HP ElitePad 1000 G2 Maintenance and Service Guide - Page 76
Battery, Disconnect all external devices from the Retail Jacket.
View all HP ElitePad 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
5. If installed, slide the tablet out of the Retail Jacket. Reverse this procedure to install the top cap. Battery Description Battery (2-cell, 21-Wh, 2.96-Ah, Li-ion) Spare part number 687946-001 Before removing the battery, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet or the Retail Jacket. 3. Disconnect all external devices from the Retail Jacket. 4. If installed, remove the tablet from the Retail Jacket (see Top cap on page 67). Remove the battery: 1. Loosen the 4 captive screws (1) that secure the battery to the Retail Jacket. 68 Chapter 5 Removal and replacement procedures