HP ElitePad 1000 HP ElitePad 1000 G2 Maintenance and Service Guide - Page 69
WLAN antenna, following components
View all HP ElitePad 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
7. Remove the docking connector cable (3). Reverse this procedure to install the docking connector cable. WLAN antenna NOTE: The WLAN antenna are included in the Antenna Kits and include the WLAN antenna main and auxiliary cables and transceivers. Description Antenna Kit for use only in European countries and regions Antenna Kit for use only in Japan Antenna Kit for use only in the United States Spare part number 767884-001 767885-001 767883-001 Before removing the WLAN antenna, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display assembly (see Display assembly on page 30), and then remove the following components: a. NFC antenna (see NFC antenna on page 38) b. WWAN module (see WWAN module on page 39) c. Power button board (see Power button board on page 45) Tablet component replacement procedures 61