HP ElitePad 1000 HP ElitePad 1000 G2 Maintenance and Service Guide - Page 67
Docking connector cable, and then remove
View all HP ElitePad 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
3. Remove the slot cover (4) by pressing it through the bottom cover. 4. Remove the slot cover. Reverse this procedure to install the slot cover. Docking connector cable Description Docking connector cable (includes double-sided adhesive) Spare part number 747631-001 Before removing the docking connector cable, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display assembly (see Display assembly on page 30), and then remove the following components: a. NFC antenna (see NFC antenna on page 38) b. WWAN module (see WWAN module on page 39) c. Power button board (see Power button board on page 45) Tablet component replacement procedures 59