HP ElitePad 1000 HP ElitePad 1000 G2 Maintenance and Service Guide - Page 60

from the bottom cover. The WWAN/GPS main, Detach the WWAN/GPS main transceiver

Get HP ElitePad 1000 PDF manuals and user guides View all HP ElitePad 1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

5. Remove the NFC antenna (see NFC antenna on page 38). 6. Remove the power button board (see Power button board on page 45). Remove the battery: 1. Release the volume button board cable from the retention clips (1) built into the battery. 2. Release the tab (2) built into the bottom cover that secures the WWAN/GPS antenna cables, and then release the antenna cables (3). 3. Detach the WWAN/GPS main transceiver (4) from the bottom cover. (The WWAN/GPS main transceiver is attached to the bottom cover with double-sided adhesive.) 4. Remove the six Phillips PM1.3×2.0 screws (5) that secure the battery to the bottom cover. 5. Remove the battery (6). Reverse this procedure to install the battery. 52 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
5.
Remove the NFC antenna (see
NFC antenna
on page
38
).
6.
Remove the power button board (see
Power button board
on page
45
).
Remove the battery:
1.
Release the volume button board cable from the retention clips
(1)
built into the battery.
2.
Release the tab
(2)
built into the bottom cover that secures the WWAN/GPS antenna cables, and
then release the antenna cables
(3)
.
3.
Detach the WWAN/GPS main transceiver
(4)
from the bottom cover. (The WWAN/GPS main
transceiver is attached to the bottom cover with double-sided adhesive.)
4.
Remove the six Phillips PM1.3×2.0 screws
(5)
that secure the battery to the bottom cover.
5.
Remove the battery
(6)
.
Reverse this procedure to install the battery.
52
Chapter 5
Removal and replacement procedures