HP ElitePad 1000 HP ElitePad 1000 G2 Maintenance and Service Guide - Page 92
Front cover, cover and installed on the replacement front cover see
View all HP ElitePad 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Front cover Description Front cover Spare part number 744048-001 Before removing the front cover, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet or the Security Jacket. 3. Disconnect all external devices from the Security Jacket. 4. Remove the card reader cover and top cap (see Card reader cover and Top cap on page 82). 5. If installed, remove the tablet from the Security Jacket (see Card reader cover and Top cap on page 82). NOTE: When replacing the front cover, be sure the system board is removed from the defective top cover and installed on the replacement front cover (see System board on page 76). Remove the front cover: 1. Turn the Security Jacket upside down with the top toward you. 2. Remove the two Phillips PM1.5×3.4 screws that secure the front cover to the Security Jacket. 3. Turn the Security Jacket right side up with the bottom toward you. 84 Chapter 5 Removal and replacement procedures