HP ElitePad 1000 HP ElitePad 1000 G2 Maintenance and Service Guide - Page 48
following illustration., Reverse this procedure to install the WWAN module.
View all HP ElitePad 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4. Remove the WWAN module (4) by sliding it away from the socket on the system board. NOTE: If the WWAN antenna cables are not connected to the terminals on the WWAN module, protective sleeves should be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WWAN module. 40 Chapter 5 Removal and replacement procedures
4.
Remove the WWAN module
(4)
by sliding it away from the socket on the system board.
NOTE:
If the WWAN antenna cables are not connected to the terminals on the WWAN
module, protective sleeves should be installed on the antenna connectors, as shown in the
following illustration.
Reverse this procedure to install the WWAN module.
40
Chapter 5
Removal and replacement procedures