HP ElitePad 1000 HP ElitePad 1000 G2 Maintenance and Service Guide - Page 55
Volume button board, built into the battery.
View all HP ElitePad 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Reverse this procedure to install the power button board. Volume button board Description Volume button board (includes bracket and cable) Spare part number 759031-001 Before removing the volume button board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display assembly (see Display assembly on page 30). 5. Remove the NFC antenna (see NFC antenna on page 38). Remove the volume button board: 1. Disconnect the volume button board cable (1) from the power button board. 2. Release the volume button board cable from the retention clips (2) built into the battery. 3. Remove the two Phillips PM1.5×2.0 screws (3) that secure the volume button board to the bottom cover. Tablet component replacement procedures 47