HP ElitePad 1000 HP ElitePad 1000 G2 Maintenance and Service Guide - Page 51

Microphones, from the molding built into the bottom cover. - battery replacement

Get HP ElitePad 1000 PDF manuals and user guides View all HP ElitePad 1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Microphones NOTE: The microphones are included in the Webcam/Microphone Kit, spare part number 762828-001. Before removing the microphones, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display assembly (see Display assembly on page 30). 5. Remove the NFC antenna (see NFC antenna on page 38). Remove the microphones: 1. Detach the tape (1) that secures the left microphone cable to the battery. 2. Disconnect the left microphone cable (2) from the power button board. 3. Release the left microphone (3) from the molding built into the bottom cover. 4. Disconnect the right microphone cable (4) from the system board. 5. Release the right microphone (5) from the molding built into the bottom cover. 6. Remove the microphones and cables. Reverse this procedure to install the microphones. Tablet component replacement procedures 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
Microphones
NOTE:
The microphones are included in the Webcam/Microphone Kit, spare part number
762828-001.
Before removing the microphones, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the display assembly (see
Display assembly
on page
30
).
5.
Remove the NFC antenna (see
NFC antenna
on page
38
).
Remove the microphones:
1.
Detach the tape
(1)
that secures the left microphone cable to the battery.
2.
Disconnect the left microphone cable
(2)
from the power button board.
3.
Release the left microphone
(3)
from the molding built into the bottom cover.
4.
Disconnect the right microphone cable
(4)
from the system board.
5.
Release the right microphone
(5)
from the molding built into the bottom cover.
6.
Remove the microphones and cables.
Reverse this procedure to install the microphones.
Tablet component replacement procedures
43