HP ElitePad 1000 HP ElitePad 1000 G2 Maintenance and Service Guide - Page 46
NFC antenna, the NFC antenna cable from the system board.
View all HP ElitePad 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
NFC antenna Description NFC antenna Spare part number 747633-001 Before removing the NFC antenna, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display assembly (see Display assembly on page 30). Remove the NFC antenna: 1. Release the ZIF connector (1) to which the NFC antenna cable is attached, and then disconnect the NFC antenna cable from the system board. 2. Detach the NFC antenna (2) from the surface of the system board. (The NFC antenna is attached to the system board with double-sided adhesive.) 3. Remove the NFC antenna (3). Reverse this procedure to install the NFC antenna. 38 Chapter 5 Removal and replacement procedures