HP ElitePad 1000 HP ElitePad 1000 G2 Maintenance and Service Guide - Page 96
Card reader board, If installed, remove the tablet from the Security Jacket see
View all HP ElitePad 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
4. Remove the docking connector cable (3). Reverse this procedure to install the docking connector cable. Card reader board Description Card reader board Spare part number 744043-001 Before removing the card reader board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet or the Security Jacket. 3. Disconnect all external devices from the Security Jacket. 4. Remove the card reader cover and top cap (see Card reader cover and Top cap on page 82). 5. If installed, remove the tablet from the Security Jacket (see Card reader cover and Top cap on page 82). 6. Remove the front cover (see Front cover on page 84). 88 Chapter 5 Removal and replacement procedures