HP Integrity Superdome SX1000 Installation (Smart Setup) Guide, Windows Server - Page 31
ESP + HPSP + MSR, ESP Only, Windows Server 2008, Enter, EBSU Partition Disk screen
View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
NOTE: You might not be able to use EBSU to flash the firmware of some devices. You cannot flash the firmware if the installed version is the same or higher than the version on the Smart Setup media. Also, you cannot use EBSU to flash the Management Processor (MP) firmware. You must download the latest MP firmware from the HP Integrity support site and flash it separately. See: http://www.hp.com/support/itaniumservers/. 8. EBSU displays the partition disk screen. Select ESP + HPSP + MSR or ESP Only. HP recommends the default - ESP + HPSP + MSR - as a way to simplify the maintenance of your server. Figure 2-3 EBSU Partition Disk screen 9. EBSU displays an install options screen. Accept the default options to install the Drive Explorer utility (for browsing a drive in EFI) and offline diagnostic tools (from the HP Integrity Offline Diagnostics CD) in the HPSP partition. Also specify which version of the Windows OS Installer to launch (in this case: Windows Server 2008). Then select Next and press Enter. Figure 2-4 EBSU Install Options screen Install from a Headless Console 31