HP Latex 3200 Users Guide - Page 385

● To achieve the best performance from your printer, use only genuine HP supplies and accessories, whose reliability and performance have been thoroughly tested to give trouble-free performance and best-quality prints. ● Check that the substrate type selected in the Internal Print Server is the same as the substrate type loaded into the printer. CAUTION: If you have the wrong substrate type selected, you could experience poor print quality and incorrect colors, and perhaps even damage to the printheads. ● Check that you are printing on the right side of the substrate. ● Check that you are using in the RIP software the correct substrate preset, which includes the ICC profile for your substrate and print mode. ● Check whether there are any outstanding printer alerts in the Internal Print Server. React to the alert as instructed in this guide. In particular: ● Make sure the substrate is flat and has no wrinkles. See Troubleshoot substrate issues on page 359. ● Check that the substrate has no skew or telescoping. Check that you are loading the substrate using the correct process. See Load a roll into the printer on page 65. ● For color consistency issues, check that the color calibration was performed when the substrate was added to the Internal Print Server. See Use a new substrate on page 103. ● Make sure it has also been performed in the current conditions, especially considering substrate batch and printheads. See Color calibration on page 178. ENWW General advice 379