HP Latex 3200 Users Guide - Page 94
Side A: Load and print, Print, Substrate load/unload, How to unload, side A, Side B: loading space
View all HP Latex 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
On Side A, after each row of images a black continuous line called a "registration line" is automatically printed: (a) and (b) below. These registration lines are used while printing Side B to minimize any registration errors in the direction of substrate movement. When the whole of Side A has been printed, a space (c) is normally left blank for calibrations (the substrate is already warmed up), and a further space (d) is left blank so that the substrate can be loaded for printing Side B. However, these blank spaces are optional: you can turn them off. Side A: Load and print 1. Load the roll-to-roll configuration: see Load a roll (roll-to-roll configuration) on page 67. NOTE: Neither the dual-roll spindle nor the ink collector kit can be used while printing double-sided jobs. 2. Define side A preferences (see Double-sided on page 135) and select the Print button. 3. Before unloading the substrate, select the Substrate load/unload button in the IPS, select How to unload side A, and follow the on-screen instructions. NOTE: Jobs must be defined for double-sided printing, side A and side B, this information is available while a job is printing in Print Properties. NOTE: Selecting the check boxes Side B: loading space and Side B: Calibration space is highly recommended, see Define double-sided job on page 135. 88 Chapter 4 Handle the substrate ENWW