HP Latex 3200 Users Guide - Page 97

NOTE: To help make the alignment we recommend making a mark with a pen or pencil at the registration line (1), but on Side B (2). Do not make a mark by cutting with scissors as this can cause the substrate to come into contact with the printheads. 3. Define Side B (see Double-sided on page 135) and press the Print button. NOTE: Before pressing Print, ensure that the correct side is selected. The printer will automatically detect the registration line and the Side B image will be positioned to minimize registration errors. This detection occurs automatically after each row detected and an adjustment is made accordingly. 4. Unload the roll. Print a double-sided job with dual-roll You can also print side A of a double-sided job with dual rolls. To print side B, each roll has to be printed one at a time. IMPORTANT: Rolls that weigh more than 200 kg (441 lb) on narrow rolls less than 178 cm (70 in) can cause dangerous spindle bow that can in turn lead to spindle deformation. See Substrate sizes on page 411 for information on appropriate dimensions of substrate rolls. 1. When you have printed all jobs on side A, make a small mark on the registration line so that it can be aligned later with the platen. NOTE: When loading side A, check the Dual roll and Load side A boxes. ENWW Double-sided printing 91