HP Latex 3200 Users Guide - Page 69
HP Latex 3500/3600 dual-roll split spindles center support
View all HP Latex 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Minimum gap between rolls Maximum roll diameter Maximum total weight of both rolls Latex 3000/3100/3200 dual-roll spindle specifications 40 mm (1.6 in) 300 mm (11.8 in) 2 × 70 kg (2 × 154 lb) If this is the first time you use the dual roll, it has to be installed and calibrated. See the Installation Guide for more information. HP Latex 3500/3600 dual-roll split spindles center support Risk of trapped fingers If your printer is an HP Latex 3500/3600, you can print on two rolls at the same time by using the dual-roll split spindle. See the Installation Guide to check the installation of the center support split spindle assembly. IMPORTANT: Two dual roll center supports are provided. The higher one corresponds to the input side of the printer and the other one to the output side. You have to follow the same process in order to install input and output side central supports to the corresponding base. To assemble the center support split spindles to its base, insert the center support foot on the base guides and move it to the end by pushing the handle. Make sure that the base hook is fixed. If you want to remove the center support, raise the blue lever with a hand, and firmly pull the center support to remove it from its base. ENWW Load a roll onto the spindle 63