HP ML150 HP ProLiant ML150 G6 Server Maintenance and Service Guide - Page 30
To re-attach and close the front bezel, the chassis.
UPC - 884420743644
View all HP ML150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
To re-attach and close the front bezel: 1. Insert the three hooks on the right side of the bezel into the rectangular holes on the chassis. 2. Rotate the bezel to the left so that the three tabs on the left side of the bezel snap into the slots on the chassis. Figure 3-4 Closing the front bezel End of procedure. Removal and replacement procedures 30
To re-attach and close the front bezel:
1.
Insert the three hooks on the right side of the bezel into the rectangular holes on the chassis.
2.
Rotate the bezel to the left so that the three tabs on the left side of the bezel snap into the slots on
the chassis.
Figure
3
-4
Closing the front bezel
End of procedure.
Removal and replacement procedures
30