HP ML150 HP ProLiant ML150 G6 Server Maintenance and Service Guide - Page 66
Accessing the BIOS Setup Utility, Navigating through the Setup Utility
UPC - 884420743644
View all HP ML150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Accessing the BIOS Setup Utility To access the BIOS Setup Utility, perform the following steps: 1. Turn on the monitor and server. If the server is already turned on, save your data and exit all open applications, then restart the server. 2. When the HP logo is displayed during POST, press F10. After a few moments, the Main menu will be displayed (Figure 4-1). NOTE: If you fail to press F10 before POST is completed, you will need to restart the server. Figure 4-1 Main menu of the BIOS Setup Utility Navigating through the Setup Utility Table 4-1 lists and describes the keys used for navigating through the Setup Utility menus and selecting and changing parameters. Pressing F1 from the Main menu displays a pop-up menu that also displays most of the navigation keys and their functions. Diagnostic Tools and Setup Utilities 66