HP ML150 HP ProLiant ML150 G6 Server Maintenance and Service Guide - Page 51
Installing an expansion card, Press and hold the latches
UPC - 884420743644
View all HP ML150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Installing an expansion card To install an expansion card: 1. Power down the server. 2. Disconnect the power cord(s). 3. Unlock the server if necessary and remove the access panel as described in the section "System covers" 4. Press and hold the latches (Figure 3-29, 1), and turn the card holder upward. Figure 3-29 Releasing the expansion card holder 5. Remove the expansion slot cover (Figure 3-29, 2). Removal and replacement procedures 51
Installing an expansion card
To install an expansion card:
1.
Power down the server.
2.
Disconnect the power cord(s).
3.
Unlock the server if necessary and remove the access panel as described in the section ”System
covers”
4.
Press and hold the latches (Figure 3-29, 1), and turn the card holder upward.
Figure
3
-29
Releasing the expansion card holder
5.
Remove the expansion slot cover (Figure 3-29, 2).
Removal and replacement procedures
51