HP ML150 HP ProLiant ML150 G6 Server Maintenance and Service Guide - Page 58
To replace the rear fan assembly, End of procedure.
UPC - 884420743644
View all HP ML150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
To replace the rear fan assembly: 1. Secure the rear fan to the chassis with 2 screws. (Figure 3-36, 1). 2. Connect the fan cable to system board connector. (Figure 3-36, 2) 3. Slide the fan assembly toward the expansion slots until it snaps into place. Figure 3-37 Installing a rear system fan 4. Replace the air baffle. 5. Replace the access panel and reconnect the power cord(s). End of procedure. Removal and replacement procedures 58
To replace the rear fan assembly:
1.
Secure the rear fan to the chassis with 2 screws. (Figure 3-36, 1).
2.
Connect the fan cable to system board connector. (Figure 3-36, 2)
3.
Slide the fan assembly toward the expansion slots until it snaps into place.
Figure
3
-37
Installing a rear system fan
4.
Replace the air baffle.
5.
Replace the access panel and reconnect the power cord(s).
End of procedure.
Removal and replacement procedures
58