HP ML150 HP ProLiant ML150 G6 Server Maintenance and Service Guide - Page 49
not fit easily into the slot
UPC - 884420743644
View all HP ML150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
To install a memory module: 1. Completely open the holding clips.. 2. Orient the module so that the notch on the bottom edge of the module aligns with the keyed surface of the DIMM slot, and then press it fully into the slot (Figure 3-27, 1). 3. Firmly press the holding clips inward to secure the memory module in place (Figure 3-27, 2). Figure 3-27 Installing a memory module (DIMM) CAUTION: The memory slots are structured to ensure proper installation. If a memory module does not fit easily into the slot, it may be inserted incorrectly. Double-check the orientation of the module and reinsert. If the holding clips do not close completely, the module is not inserted correctly. End of procedure. Removal and replacement procedures 49
To install a memory module:
1.
Completely open the holding clips..
2.
Orient the module so that the notch on the bottom edge of the module aligns with the keyed
surface of the DIMM slot, and then press it fully into the slot (Figure 3-27, 1).
3.
Firmly press the holding clips inward to secure the memory module in place (Figure 3-27, 2).
Figure
3
-27
Installing a memory module (DIMM)
CAUTION:
The memory slots are structured to ensure proper installation. If a memory module does
not fit easily into the slot, it may be inserted incorrectly. Double-check the orientation of the module
and reinsert.
If the holding clips do not close completely, the module is not inserted correctly.
End of procedure.
Removal and replacement procedures
49