HP ML150 HP ProLiant ML150 G6 Server Maintenance and Service Guide - Page 41
Slide the backplane up slightly to clear the four cage hooks and securing post and then lift
UPC - 884420743644
View all HP ML150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
6. Remove the 4 mounting screws from the HDD cage (Figure3-16, 1) and slide the HDD cage out from the server chassis (Figure3-16, 2). Figure 3-16 Removing a hot-plug HDD cage 7. To remove and replace the backplane: a. Remove the two screws securing the backplane to the HDD cage (Figure3-17, 1). b. Slide the backplane up slightly to clear the four cage hooks and securing post and then lift the backplane away from the cage (Figure3-17, 2). Figure 3-17 Removing the backplane from the HDD cage c. To replace the backplane, reverse steps a and b. End of procedure. To replace the hot-plug HDD cage, reverse steps 1 through 6. Removal and replacement procedures 41
6.
Remove the 4 mounting screws from the HDD cage (Figure3-16,
1) and slide the HDD cage out
from the server chassis (Figure3-16,
2).
Figure
3
-16
Removing a hot-plug HDD cage
7.
To remove and replace the backplane:
a.
Remove the two screws securing the backplane to the HDD cage (Figure3-17, 1).
b.
Slide the backplane up slightly to clear the four cage hooks and securing post and then lift
the backplane away from the cage (Figure3-17, 2).
Figure
3
-17
Removing the backplane from the HDD cage
c.
To replace the backplane, reverse steps a and b.
End of procedure.
To replace the hot-plug HDD cage, reverse steps 1 through 6.
Removal and replacement procedures
41