HP ML150 HP ProLiant ML150 G6 Server Maintenance and Service Guide - Page 46
the processor and could cause the server to shut down
UPC - 884420743644
View all HP ML150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
6. Properly align the heatsink mounting screws to the system board mounting holes so that the air flow indicator arrow on the top of the heatsink should point toward the rear of the chassis (Figure 3-23, 1) and tighten with a screwdriver (Figure 3-23, 2). CAUTION: Do not over-tighten heatsink mounting screws. Figure 3-23 Installing the heatsink assembly 7. Install heatsink. CAUTION: Failure to connect the processor fan cable to the system board may result in damage to the processor and could cause the server to shut down without displaying messages. 8. Align the air baffle guide pins with the holes on the chassis support bar and lower it into place. Figure 3-24 Installing the air baffle End of procedure. Removal and replacement procedures 46