HP ML150 HP ProLiant ML150 G6 Server Maintenance and Service Guide - Page 93
SAS/SATA Hot-Plug Hard Drive LEDs
UPC - 884420743644
View all HP ML150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
SAS/SATA Hot-Plug Hard Drive LEDs The SAS and SATA hot-plug hard drive LEDs are located on each physical drive and visible when the front bezel is open. • Activity LED-This green LED indicates the disk drive access activity. This LED is controlled by the disk drive directly. When a drive is accessed, the LED shows a green light • Status LED-This amber/blue LED indicates the drive operating condition: normal, warning, or failure. Table 5-3 describes the LEDs signals used to indicate the operating status of a SAS or SATA disk drive. Table 5-3 Carrier status light definitions Activity (green) Status (amber/blue) Description No power, offline or not configured Normal operation under power. no activity [green is on-solid] Normal operation under power, disk activity [green is fluttering] Offline, disk not being accessed, predictive failure [amber is flashing at constant 1 Hz] Online, no activity, predictive failure (further investigation required) [green is fluttering, amber is flashing at constant 1 Hz] Disk activity, predictive failure (further investigation required) [green is fluttering, amber is flashing at constant 1 Hz] Offline, no activity, critical fault condition [amber is on-solid] Offline, drive selected (blue reserved for identification only) [blue is on steady] Drive rebuilding [green is flashing at constant 1 Hz] Components, Switches, and Indicators 93