HP Neoware e90 Neoware Thin Client - Thintune Operating System Manual - Page 97
Rescue System - upgrades
View all HP Neoware e90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Please make sure that „enable comX portmapping" is checked. Now either configure the terminal emulation or the Telnet Client. To be independent from the IP-address of the terminal set the THINTUNE-IP to its loopback address which is 127.0.0.1. As the port address either choose 9101 or that port number which is configured in the portmapper. 10.5 Rescue System All THINTUNE Thin Clients are capable of an internal rescue system which enables you to still operate your THINTUNE TC even if the downloaded firmware is corrupted. Corruption at firmware basically will happen whenever a terminal is powered off during upgrade process. THINTUNE OS which is the THINTUNE OS basically will be loaded by a bootloader at time of start up. If corrupted firmware is detected the bootloader will take care to start the rescue system from a TFTP Server. To use the rescue system please make sure to meet following requirements. DHCP Server TFTP Server Rescue Files Firmwareserver The TFTP-server can be requested at [email protected]. The Firmwareserver can be downloaded at www.thintune.de. The DHCP-server is included in Windows Server OS. 96