HP Scanjet Enterprise 8500 HP Scanjet Enterprise 8500 fn1 - User Guide - Page 25
Jetdirect menus continued, Table 3-6
View all HP Scanjet Enterprise 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Table 3-6 Jetdirect menus (continued) Menu item Sub-menu item Sub-menu item Manual Settings IPV6 Settings Primary DNS Secondary DNS Enable Address Manual Values and Description (Available only if the Config Method item is set to the Manual value) Configure parameters directly from the control panel: IP Address: The unique IP address of the product (n.n.n.n), where n is a value from 0 to 255. Subnet Mask: The subnet mask for the product (m.m.m.m), where m is a value from 0 to 255. Syslog Server: The IP address of the syslog server used to receive and log syslog messages. Default Gateway: The IP address of the gateway or router used for communications with other networks. Idle Timeout: The time period, in seconds, after which an idle TCP data connection is closed (default is 270 seconds, 0 disables the timeout). Specify the IP address (n.n.n.n) of a Primary DNS Server. Specify the IP address (n.n.n.n) of a Secondary Domain Name System (DNS) Server. Use this item to enable or disable IPv6 operation on the server. On (default): IPv6 is enabled. Off: IPv6 is disabled. Type the server address, a 32 hexadecimal digit IPv6 node address that uses the colon hexadecimal syntax. Use this item to manually set IPv6 addresses on the server. Enable: Select this item and choose the On setting to enable manual configuration, or the Off setting to disable manual configuration. Address: Use this item to type a 32 hexadecimal digit IPv6 node address that uses the colon hexadecimal syntax. Basic configuration using the Administration menu 17