HP Tc2120 HP Server tc2120 Network Operating System - Installation Guide - Page 11
Select the WIN2000 Promise FastTrack100 TX2™ Controller adapter, then, Setup Screen.
UPC - 808736945332
View all HP Tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
c. Press Enter to continue. d. Select the WIN2000 Promise FastTrack100 TX2™ Controller adapter, then press Enter. 4. Press Enter to continue at the "Windows 2000 Server Setup - Welcome to Setup" Screen. 5. Press C to continue Setup at the "Setup has determined that your computer's startup hard disk is new..." screen. 6. Press F8 to accept the licensing agreement. 7. At the drives partitioning screen, select the target drive. If you want to use the entire drive to install Windows 2000 then press Enter. Otherwise, press C to create a drive a partition. In this example we will create a 4GB partition. Please note that Windows 2000 does not have the 2GB limitation present on NT 4.0. a. Press C to create a partition. b. At the "Create partition size" prompt, type 4096 and press Enter. c. HP recommends that you create all the partitions needed for each hard drive present on your system. Select unpartitioned space and press C again to create additional partitions. 8. Select the target drive to be used to install Windows 2000. Press Enter. 9. Select "Format the partition using the NTFS file system" and press Enter. 10. The installer will format and copy files to the hard drive. 11. The system will reboot and launch Windows 2000 graphic interface. Be sure to remove the driver diskette before the reboot. 12. At the "Installation Wizard" first dialog box, click Next to continue. 13. The "Installing Devices" screen will be shown with a progress bar on the display. This may take 10 to 15 minutes. 14. You can now proceed through the customization of your installation using the graphical interface. 11