HP Tc2120 HP Server tc2120 Network Operating System - Installation Guide - Page 51
Create the Drivers Diskettes, Perform NetWare 6.0 Installation
UPC - 808736945332
View all HP Tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Section 2. Create the Drivers Diskettes 1. Locate one blank, formatted 3.5" diskette. 2. Insert your HP Startup CD in a Windows PC and follow the on-screen instructions to create the HP Server tc2120 NetWare SCSI drivers (HP disk NW SCSI). NOTE: If the Windows PC does not auto-start the Startup menu, start it by opening Startup.htm, found at the root level of the Startup CD. Section 3. Perform NetWare 6.0 Installation The installation of NetWare 6.0 or SBS 6.0 contains several phases: • Phase 1 - Start the Installation • Phase 2 - Install HP Drivers • Phase 3 - Configure the Network • Phase 4 - Install the Support Pack Phase 1 - Start the Installation NOTE: If your hard drive contains data or is not new, HP recommends using a utility such as fsidk to erase all data and partitions from your hard drive. For NetWare 6.0 1. Insert the Novell NetWare 6.0 CD-ROM and boot the system. 2. Press Enter to read the license agreement then press Esc, and select "Accept License Agreement." 3. Press Enter to "Create a New Boot Partition." 4. Depending on the size of the booting storage device and available memory of the server, the installation program will recommend an appropriate boot partition size. HP recommends a 1000-MB boot partition. Choose continue to proceed. 51