HP Tc2120 HP Server tc2120 Network Operating System - Installation Guide - Page 44
Perform NetWare 5.1 Installation, Phase 1 – Start the Installation
UPC - 808736945332
View all HP Tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
4. Create the third diskette for Novell 5.1 patch (HP disk NW patch). Choose the correct link for your OS language version: - For an English-only version, click hp server tc2120 NetWare 5.1 (English only version) processor patch. - For multi-languages or other languages than the English version, click hp server tc2120 NetWare 5.1 (Non English only version) processor patch. IMPORTANT: This Intel® Pentium® 4/Celeron Processor patch must be used when installing the NetWare 5.1 operating system. HP also recommends checking the Novell website for the latest patch information. Section 2. Perform NetWare 5.1 Installation The installation of NetWare 5.1 contains several phases: • Phase 1 - Start the Installation • Phase 2 - Install HP Drivers • Phase 2 - Configure the Network Phase 1 - Start the Installation NOTE: If your hard drive contains data or is not new, HP recommends backing up the data and then using a utility such as fdisk to erase all data and partitions from your hard drive. For NetWare 5.1 (Installing Pentium 4/Celeron Patch) 1. Boot your HP Server on a DOS bootable utility diskette. NOTE: You can boot from the NetWare SBS 5 License diskette. Novell DOS 7 and all required DOS utilities (fdisk, format, edit) are included on the diskette. 2. Type FDISK to create a 100 MB primary DOS partition on the primary drive (C:). Remember to make it the active (bootable) partition. The computer restarts and boots on the DOS bootable utility diskette again. 44