HP Vectra XU 6/XXX HP Vectra XU 6/xxx Pc User’s Guide - d4369-90001 - Page 70
Connect the power cable and the data cable to the rear of the drive.
View all HP Vectra XU 6/XXX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
3 How to Install Accessories Inside Your PC Installing Disk Drives 7 Locate the appropriate data cable for the hard disk drive. IDE drives should be connected to a free IDE Channel cable connector (You can add up to three IDE devices.) NOTE A second IDE cable is in a bag supplied separately with your PC. SCSI drives can be connected to any free connector on the SCSI cable Power Cable 8 Connect the power cable and the data cable to the rear of the drive. (The connectors are shaped to go in one way only.) Data Cable 9 Install any other accessories before completing the installation. 10 Turn to page 62 to complete the installation. 58 English
3
How to Install Accessories Inside Your PC
Installing Disk Drives
58
English
7
Locate the appropriate data cable for the hard disk drive.
8
Connect the power cable and the data cable to the rear of the drive.
(The connectors are shaped to go in one way only.)
9
Install any other accessories before completing the installation.
10
Turn to page 62 to complete the installation.
IDE drives should be
connected to a free IDE
Channel cable connector
(You can add up to three
IDE devices.)
SCSI drives can be
connected to any
free connector on
the SCSI cable
NOTE
A second IDE cable is in a
bag supplied separately
with your PC.
Power Cable
Data Cable