HP Vectra XU 6/XXX HP Vectra XU 6/xxx Pc User’s Guide - d4369-90001 - Page 89
Troubleshooting Your PC and Using the Setup Program, What you should do, Explanation
View all HP Vectra XU 6/XXX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
4 Troubleshooting Your PC and Using the Setup Program If Your PC Does Not Start 61xx, 6500, 6510, 6520 8x06 65xx, 66xx 8060 910B What you should do: 1 Ensure the memory modules are installed correctly (refer to chapter 3). 2 If this does not fix the problem, initialize the system ROM (refer to "If You Can't Start the Setup Program" in this chapter on page 86). 3 If the problem persists, the system board may need to be replaced. Contact your service representative. What you should do: 1 Disable all shadowing with the Setup program. 2 If this fails to correct the problem, the system board may need to be replaced. Contact your service representative. What you should do: 1 Check that the hard disk drive has not been disabled with the Setup program. 2 Check that the disk power and data cables are correctly connected (refer to chapter 3). Explanation: 1 You connected the flexible disk drive connector B to the disk drive, and there is no connection to a drive A. 2 Change the flexible disk drive connector to A (refer to chapter 3). English 77