IBM 7379E2U User Manual - Page 104
Installing a second microprocessor
View all IBM 7379E2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Installing a second microprocessor The following notes describe the type of microprocessor that the server supports and other information that you must consider when you install a microprocessor: v The server supports certain Intel Xeon scalable multi-core microprocessors, which are designed for the LGA 1366 socket. These microprocessors are 64-bit dual-core or quad-core microprocessors with an integrated memory controller, quick-path interconnect, and shared last cache. See http://www.ibm.com/servers/ eserver/serverproven/compat/us/ for a list of supported microprocessors. v The server supports up to two microprocessors. If the server comes with one microprocessor, you can install a second microprocessor. v Both microprocessors must have the same QuickPath Interconnect (QPI) link speed, integrated memory controller frequency, core frequency, power segment, cache size, and type. v Read the documentation that comes with the microprocessor to determine whether you must update the server firmware for the server. To download the most current level of server firmware and many other code updates for your server, complete the following steps: 1. Go to http://www.ibm.com/systems/support/. 2. Under Product support, click System x. 3. Under Popular links, click Software and device drivers. 4. Click System x3400 M3 to display the matrix of downloadable files for the server. v (Optional) Obtain an SMP-capable operating system. For a list of supported operating systems and optional devices, see http://www.ibm.com/servers/eserver/ serverproven/compat/us/. v To order additional microprocessor optional devices, contact your IBM marketing representative or authorized reseller. v The microprocessor speeds are automatically set for this server; therefore, you do not have to set any microprocessor frequency-selection jumpers or switches. v If you have to replace a microprocessor, call for service. v If the thermal-grease protective cover (for example, a plastic cap or tape liner) is removed from the heat sink, do not touch the thermal grease on the bottom of the heat sink or set down the heat sink. v Do not remove the first microprocessor from the system board to install the second microprocessor. v Some models support dual-core processors and quad-core processors. Do not use dual-core processors and quad-core processors in the same system. Install all dual-core or all quad-core processors in the server. The following illustration shows the microprocessor socket locations on the system board. 88 IBM System x3400 M3 Type 7378/7379: Installation and User's Guide