IBM 7379E2U User Manual - Page 68
Installing the air baffle, Return the power-supply cage to its closed position see Closing
View all IBM 7379E2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Installing the air baffle To install the air baffle, complete the following steps: 1. With the rear (hinged) part of the air baffle lifted up, align the positioning pins on the ends of the air baffle with the locating holes in the server chassis and fan cage assembly. 2. Slide the air baffle down into the server 1 until the positioning pins fit into the locating holes; then, press down on the air baffle until the pinch tab clicks into place. 3. Rotate the rear (hinged) part of the air baffle 2 down to the system board. Note: Make sure that the power-supply cage cables are not caught under the air baffle. 4. Return the power-supply cage to its closed position (see "Closing the power-supply cage" on page 56). 5. Install the hot-swap power supply or power supplies (see "Installing a redundant power supply and fans" on page 93). 6. Install and lock the left-side cover (see "Completing the installation" on page 96). 7. Reconnect the external cables and power cords; then, turn on the attached devices and turn on the server. 52 IBM System x3400 M3 Type 7378/7379: Installation and User's Guide