IBM 865741Y Handbook - Page 100

1. Remove the server cover (see "Preparing to Add Options" on page 56). 2. Your server comes with a tray installed in bay 2. If you are installing a 5.25-inch drive in bay 2, you must first remove the tray. To do this, remove the four screws on the bottom of the tray. 3. If a tray is attached to a drive that you intend to install, you must remove the tray before installing the drive. Follow the instructions in the documentation that comes with the drive. 4. Using the instructions that come with the drive, together with these instructions, verify that any switches or jumpers on the drive are set correctly. Change the settings if necessary. For information about termination requirements, see "Termination Requirements" on page 75. 5. Remove the upper drive bracket. See step 4 on page 77. 6. Touch the static-protective package containing the new drive to any unpainted metal surface; then, remove the drive. 82 Netfinity 3500 User's Handbook