IBM 865741Y Handbook - Page 97
in.; then, slide it sideways until it is out of the server.
![]() |
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
d. Remove the screws that secure the top and the bottom of the upper drive bracket. e. Slide the drive bracket to the rear approximately 25 mm (1.0 in.); then, slide it sideways until it is out of the server. f. If the drive that you are installing has removable media, remove the static shield from the drive bay where you are installing the drive. g. Continue with step 6 on page 80. Chapter 4. Installing Options 79
![](/manual_guide/products/ibm-865741y-handbook-1d257f5/97.png)
d.
Remove the screws that secure the top and the bottom of
the upper drive bracket.
e.
Slide the drive bracket to the rear approximately 25 mm
(1.0
in.); then, slide it sideways until it is out of the server.
f.
If the drive that you are installing has removable media,
remove the static shield from the drive bay where you are
installing the drive.
g.
Continue with step 6 on page
80.
Chapter 4.
Installing Options
79