IBM 865741Y Handbook - Page 112
Remove the terminator card in the secondary microprocessor
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Installing Microprocessors c. Carefully place one hand on the server frame and pull the microprocessor up and out of the connector with the other hand. d. Store the old microprocessor in a static-protective package. e. Go to step 7 to install the replacement microprocessor. 5. Locate the secondary microprocessor socket on the system board. (See the illustration in "System Board Illustration" on page 203.) 6. Remove the terminator card in the secondary microprocessor socket. 7. Touch the static-protective package containing the new microprocessor to any unpainted metal surface in the server; then, remove the new microprocessor. 94 Netfinity 3500 User's Handbook
Installing Microprocessors
c.
Carefully place one hand on the server frame and pull the
microprocessor up and out of the connector with the other
hand.
d.
Store the old microprocessor in a static-protective package.
e.
Go to step 7 to install the replacement microprocessor.
5.
Locate the secondary microprocessor socket on the system
board.
(See the illustration in “System Board Illustration” on
page 203.)
6.
Remove the terminator card in the secondary microprocessor
socket.
7.
Touch the static-protective package containing the new
microprocessor to any
unpainted
metal surface in the server;
then, remove the new microprocessor.
94
Netfinity 3500 User's Handbook