IBM 865741Y Handbook - Page 154

POST Messages POST Message 1762 178X Description A hard disk configuration error occurred. Action: 1. Verify that the Configuration/Setup Utility program correctly reflects the number of hard disk drives that you have installed. If the drive information is not correct, change it. (For instructions on using the Configuration/Setup Utility program, see "Using the Configuration/Setup Utility Program" on page 28.) 2. If you added or removed a hard disk drive, you must save the new configuration in the Configuration/Setup Utility program. See "Using the Configuration/Setup Utility Program" on page 28 for additional information and instructions on saving the configuration. If the problem cannot be isolated and corrected, have the system serviced. A failure occurred during testing of the hard disk drive or a primary or secondary IDE device. Action: 1. Run the diagnostic programs. (See "Running the Diagnostic Test Programs" on page 124 for information on running the diagnostic programs that come with your server.) 2. If the diagnostic programs detect a failure, replace the defective hard disk drive or primary or secondary IDE device. If the problem cannot be isolated and corrected, have the system serviced. 136 Netfinity 3500 User's Handbook