IBM 865741Y Handbook - Page 94
Preinstallation Steps All Bays
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Preinstallation Steps (All Bays) Before you begin, be sure you have: Read "Electrical Safety" on page 54 and "Handling Static-Sensitive Devices" on page 55. Read the documentation that comes with the option. Read "Termination Requirements" on page 75. Verified that you have all cables, drive trays, and any other equipment specified in the documentation that comes with the internal drive. Before you can install drives in your Netfinity 3500 server, you might need to perform certain preinstallation activities. Some of the steps are required only during the initial installation of an option. 1. Remove the server cover (see "Preparing to Add Options" on page 56). 2. Choose the bay in which you want to install the drive. (Refer to Table 2 on page 71 for the drive types and sizes available for each bay.) 3. Access the appropriate drive bays. Notes: a. In all models, drive bays 1 and 4 come with drives preinstalled. b. In some models, drive bay 6 comes with a drive preinstalled. c. Drive bays 2 and 3 have a bay panel and static shield installed. d. If you remove a drive that has removable media and you do not intend to install a new drive immediately, reinstall the static shield and bay panel for that bay. To access drive bays 1 through 4, go to step 4 on page 77. To access drive bays 5 and 6, go to step 5 on page 80. 76 Netfinity 3500 User's Handbook