IBM 865741Y Handbook - Page 122
SCSI Connectors
![]() |
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Connecting External Options SCSI Connectors Your server comes with an 16-bit UltraSCSI controller on the system board. This controller has two 68-pin, shielded, high-density connectors. You can use these connectors to install SCSI devices in your server or to attach an external SCSI device to your server. See "SCSI Drives" on page 74 for additional information about the SCSI subsystem. Internal SCSI Connector A 4-drop, 68-pin (16-bit) cable is installed in your server. This cable is connected to the internal connector for the 16-bit UltraSCSI controller. You can use this cable to install additional SCSI devices in your server. A hard disk drive might also be installed in bay 6, depending on the model of your Netfinity 3500 server. For information about termination requirements, see "Termination Requirements" on page 75. External SCSI Connector A 16-bit, 68-pin external SCSI cable is installed in your server. The external SCSI cable provides a connector to which you can attach an external SCSI device. 104 Netfinity 3500 User's Handbook
![](/manual_guide/products/ibm-865741y-handbook-1d257f5/122.png)