IBM 865741Y Handbook - Page 144

POST Messages 4. At the POST Startup Errors screen, select Continue if you want to access the Configuration/Setup Utility program menu. Select Exit Setup if you want to exit from the Configuration/Setup Utility program. (For more information on exiting from the Configuration/Setup Utility program, go to the Attention: section that follows step 5d.) To select an item, press the Up Arrow (↑) or Down Arrow (↓) key to highlight the item; then, press Enter. 5. If you selected Continue in step 4, the Configuration/Setup Utility program menu appears on the screen. You will see a pointer next to any menu items that indicate components that are malfunctioning or that have been changed since the last time you turned on your server. If you did not knowingly make a change to a flagged component, that component is probably malfunctioning. If you made a change, continue here. If you did not make a change, go to the Attention: section that follows step 5d. To use the Configuration/Setup Utility program, do the following: a. Select the menu item that is flagged (or that you want to view) by pressing the Up Arrow (↑) or Down Arrow (↓) key; then, press Enter. b. A new menu specific to the item that you selected appears. Press the Left Arrow (←) or Right Arrow (→) key to toggle between choices for a menu item. (Note that each menu item has a Help screen. To view the Help screen, select the menu item; then, press F1.) c. When you have finished viewing and changing settings, press Esc to return to the Configuration/Setup Utility program menu. d. Before you exit from the program, select Save Settings. When you exit from the Configuration/Setup Utility program menu (see step 5e on page 127), your operating system will start automatically (unless there is an unresolved problem with the startup device). 126 Netfinity 3500 User's Handbook