IBM 865741Y Handbook - Page 153
program, see Using the Configuration/Setup Utility
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
POST Messages POST Message 604 662 762 11XX Description A failure occurred during a diskette-drive test. Action: 1. Verify that the Configuration/Setup Utility program correctly reflects the type of diskette drive that you have installed. For information on using the Configuration/Setup Utility program, see "Using the Configuration/Setup Utility Program" on page 28. 2. Run the diagnostic programs. (See "Running the Diagnostic Test Programs" on page 124 for information on running the diagnostic programs that come with your server.) 3. If the diagnostic programs detect a failure, replace the diskette drive. If the problem cannot be isolated and corrected, have the system serviced. A diskette drive configuration error occurred. Action: 1. Verify that the Configuration/Setup Utility program correctly reflects the number of diskette drives that you have installed. If the drive information is not correct, change it. For information on using the Configuration/Setup Utility program, see "Using the Configuration/Setup Utility Program" on page 28. 2. If you installed or removed a diskette drive, you must save the new configuration in the Configuration/Setup Utility program. See "Using the Configuration/Setup Utility Program" on page 28 for information and instructions on saving the configuration. 3. Run the diagnostic programs. (See "Running the Diagnostic Test Programs" on page 124 for information on running the diagnostic programs that come with your server.) If the problem persists, have the system serviced. A math coprocessor configuration error occurred. Action: Have the system serviced. A serial port error occurred. Where XX is the serial port number. Action: Have the system serviced. Chapter 5. Solving Problems 135