IBM 865741Y Handbook - Page 98
To access bays 5 and 6
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
5. To access bays 5 and 6: a. Remove the screw that secures the lower drive bracket. b. Lower the front of the drive bracket, lift up on the rear, and slide it out. c. If necessary, disconnect the power and signal cables attached to the drives in the lower drive bracket. d. Continue with step 6. 6. Touch the static-protective bag containing the drive to any unpainted metal surface on the server; then, remove the drive from the bag. 80 Netfinity 3500 User's Handbook
5.
To access bays 5 and 6:
a.
Remove the screw that secures the lower drive bracket.
b.
Lower the front of the drive bracket, lift up on the rear, and
slide it out.
c.
If necessary, disconnect the power and signal cables
attached to the drives in the lower drive bracket.
d.
Continue with step 6.
6.
Touch the static-protective bag containing the drive to any
unpainted metal surface on the server; then, remove the drive
from the bag.
80
Netfinity 3500 User's Handbook