IBM 865741Y Handbook - Page 84
Installing or Removing Memory Modules
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Working with Memory Modules Installing or Removing Memory Modules This section gives the procedure for installing memory modules. If you want to remove a memory module, reverse the order of the following steps. Before you begin: Read "Electrical Safety" on page 54 and "Handling Static-Sensitive Devices" on page 55. Read the documentation that comes with the option. Read "Accessing the System Board" on page 58. Notes: 1. Each memory connector contains two keys (dividers), which are used to assure that a memory-module can be installed only in the correct position. 2. A retaining clip at each end of the connector locks the memory module into place. 3. For information about memory configuration, see Table 1 on page 65. To install a DIMM: 1. Remove the server cover (see "Preparing to Add Options" on page 56). Table 1 on page 65. 2. Locate the memory connectors on the system board. See the illustration at the beginning of this section. 66 Netfinity 3500 User's Handbook