IBM 865741Y Handbook - Page 142
Running the Diagnostic Test Programs
![]() |
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Running the Diagnostic Test Programs Note: See "Diagnostic Test Programs" on page 119 for a description of the diagnostic programs that come with your server. To start the IBM Enhanced Diagnostics using the CD that comes with your server, do the following: 1. Turn off your server and any attached devices. Note: Do not press Ctrl+Alt+Del. 2. Turn on all attached devices; then, turn on your server. 3. Place the IBM Enhanced Diagnostic CD in the CD-ROM drive. 4. Select Exit Setup and follow the prompts. The diagnostics program will load. Follow the instructions on the screen to run the diagnostics program. Attention: 1. When you finish running diagnostic and utility programs, remove the CD from the CD-ROM drive and turn off the server. 2. Do not discard this CD. Store it in a safe place for later use. Make a backup copy of the IBM Enhanced Diagnostics CD information on a diskette. To do this: 1. Insert a blank, 3.5-inch diskette into diskette drive A. 2. Follow the previous instructions for starting the IBM Enhanced Diagnostics CD. 3. Select the menu choice for making a backup diskette. 4. Follow the instructions on the screen. To start the IBM Enhanced Diagnostics using your backup diagnostic diskette, do the following: 1. Turn off your server and any attached devices. 2. Insert the IBM Enhanced Diagnostics backup diskette into diskette drive A. 3. Turn on all attached devices; then, turn on your server. 4. Follow the instructions on the screen. 124 Netfinity 3500 User's Handbook
![](/manual_guide/products/ibm-865741y-handbook-1d257f5/142.png)