IBM 865741Y Handbook - Page 198

Replacing the Battery Before you begin, be sure you have: Read "Electrical Safety" on page 54 and "Handling Static-Sensitive Devices" on page 55. Followed any special handling and installation instructions supplied with the replacement battery. Removed the server side cover (see "Preparing to Add Options" on page 56). Note: After you replace the battery, you must reconfigure your system and reset the system date and time. To replace the battery: 1. Locate the battery on the system board (see "System Board Illustration" on page 203). 2. Remove the battery: a. Use one finger to lift the battery clip over the battery. b. Use one finger to slightly slide the battery toward the front of the server. The spring mechanism behind the battery will push it out toward you as you slide it forward. c. Use your thumb and index finger to pull the battery from under the battery clip. d. Ensure that the battery clip is touching the base of the battery socket by pressing gently on the clip. 180 Netfinity 3500 User's Handbook