IBM 865741Y Handbook - Page 132
Completing the Installation, Attention, What to do next?
![]() |
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Completing the Installation 4. Lock the side cover. You can use the cover lock and keys to secure the outside cover. For more information about the keys for the cover lock, see "Recording the Identification Numbers" on page 194. Attention: In the United Kingdom, by law, the telephone cable must be connected after the power cord. 5. Reconnect the cables to the back of the server; then, plug the power cords into properly grounded electrical outlets. 6. If you have a modem or fax machine attached to the server, and you are not in the United Kingdom, reconnect the telephone line to the wall outlet and the server, and plug the power cords into properly grounded electrical outlets. If you are in the United Kingdom, plug in the power cords first; then, connect the telephone line to the wall outlet and the server. 7. Turn on the server and all attached devices. Attention: To allow for air circulation, be sure to maintain the following minimum clearances around the server: 102 mm (4 in.) in the front 127 mm (5 in.) in the rear 51 mm (2 in.) on the left and right sides What to do next? When you have completed installing the covers and cables, go to "Updating the Server Configuration" on page 115. 114 Netfinity 3500 User's Handbook
![](/manual_guide/products/ibm-865741y-handbook-1d257f5/132.png)