IBM 865741Y Handbook - Page 195
Checking the System for Damage
![]() |
View all IBM 865741Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
Checking the System for Damage Checking the System for Damage This section provides instructions on what to do if your system might be damaged. After Dropping It Look for loose cables and obvious damage. If any cables are loose, reconnect them securely. If there is obvious damage to the system, have it serviced. If you see no damage, turn on the system. If it works correctly, the system probably did not suffer any damage. CAUTION: Observe all safety and electrostatic precautions listed in this book to avoid personal injury or damage to your system. If the system does not work correctly, turn it off and check the adapters and memory modules to ensure that they are connected correctly. Go to "Electrical Safety" on page 54 and follow the instructions for opening your system; then, reseat all adapters and memory modules. If the system still does not work correctly, run the diagnostic programs from the Diagnostic CD-ROM. See "Running the Diagnostic Test Programs" on page 124. Chapter 5. Solving Problems 177
![](/manual_guide/products/ibm-865741y-handbook-1d257f5/195.png)